New York

New York License Plate History

New York is one of the first states which manufactured license plates in large quantities, after starting small in 1902. The popularity of motor vehicles, combined with the high population and wealth, enabled New York to become the first state to issue 1,000,000 license plates, though California reached this milestone later the same year. The original New York license plates were porcelain, then riveted numbers on metal, but were soon changed to embossed metal in 1913. The state abbreviation "NY" was always present on New York license plates. In 1913 New York also began to emboss the year on each license plate. The metal used was steel and these disintegrated quickly in New York’s salt laden winter streets. New York state issued new license plates yearly, with the year of issue embossed on the plate.

From 1920 the New York license plate was approximately 5 x 14 inches. In 1929, New York’s license plate size was changed to 6 x 14 inches. This size was used until 1957 when the state of New York adopted the Society of Automotive Engineers standard for license plates: 6 x 12 inches with 4 standard locations for screw holes.

In 1939 and 1940 in honor of the event, New York issued a license plate embossed with "NEW YORK’S WORLD’S FAIR". The state did the same in 1964 when a plate was issued embossed with "NY WORLD’S FAIR" (the same plate was used in 1965 with a vertical decal issued and applied to plate on right hand corner). "NY THE EMPIRE STATE" was first embossed on New York license plates in 1951 and continued until 1963. New York issued its first license plate with retro-reflective foil from 3M in 1974, the color of the plate was reflective golden orange, or a deep reflective yellow.

The year 1986 was historic for New York license plates, the first year the state issued license plates with graphics. The Statue of Liberty was printed in red and the state printed in a deep blue, in addition to two horizontal red lines printed above and below the top and bottom mounting holes. The color of the retro-reflective foil was reflective white.

In 2001, New York issued another license plate with artwork printed on reflective white, on which the slogan "THE EMPIRE STATE" was re-introduced. The most unpopular license plate from New York was issued in 2010 in deep reflective yellow and deep blue. Car collectors despise this design and question the issuing authority's choice of colors and graphic design. Custom plates are not embossed with the exception of the border. This is not an attractive license plate design and the state may want to listen to New Yorkers and change this “ghastly� deep reflective yellow and deep blue quickly.


TestimonialsToggle

Tracy

Got my plate yesterday and it's AMAZING!!!!!!!!!!!!!!!!!!!!!!!!!! SO happy I found you guys on the web!! If I can't find a place to restore the original one I have I will be back for a 2nd plate. Nobody will know the difference! THAT is how good it is!

James - Stockbridge, Massachusetts

Hi, just received my frame, and just wanted to say it was fantastic.Thank you for the great workmanship.Jim

Steve Sierra

My order was on my desk when I arrived this morning. Thank you, great job the folks here in the corporate office were amazed at the quality. The embossed XLR8! wowed all, I've even had requests for plates of their own.I'll place an order for the new states that launch soon and may duplicate the order for our marketing department, these will be great on our conference room wall and our shuttles out in the markets.

Gladys - Orlando, Florida

WE LOVE IT!!! Other people are asking where did we order our plate from. They will be ordering some soon.Once again.Thank you,Gladys

Lanny - Fairview, Oregon

I received the 1947 OREGON STATE LICENSE PLATE--EMBOSSED WITH MY CUSTOM NUMBER BY PRIORITY MAIL ON THURSDAY, MARCH 25th, I am impressed beyond words, looking atthe plate is like being transported back in time to see my late father's 1947 Black Buick RoadMaster, White topped Convertible that had the 380-497 plate, the car was stolen in Portland,and wound up on blocks in a field in Texas, it was beyond recovery, never saw it after that.As I e-mailed earlier, I will be ordering 2 more plates, possibly on Friday March 26th or Monday March 29th. My son will be helping with the ordering, he is more familiar with theprocess of using the computer.

Miguel Gonzalez Jr. - Dallas, TX

I had seen this website about 6 months ago prior to purchasing my 2009 VW Jetta. When I finally bought the car I slowly started modifying it: 15" Kicker sub in a ported box, HID lights, smoked taillights, clear sidemarkers, and even a 2" shorty antenna. After debating with myself whether to make the purchase or not I finally gave in and ordered my German license plate with the Universal Holder. About a business week later the plates arrived and I was nervous & anxious to see how they had turned out...the product AMAZING! I still can't believe I only paid $36 for these plates that could easily have been sold for $150. The quality is top-notch and installation took about 5 minutes total. THANK YOU FOR HAVING SUCH GREAT PRODUCTS. I will definitely be recommending you guys.

Dave

My 5th plate from you over the years (019320, A-1940, C-1940, 1954STU and now 32P-KUP). The latest plate looks great, took less than a week to get it,is already mounted on the pickup and now all I have to do is finish building the rest of the project. Great deal!

Luke - Sunny Isles Beach, Florida

I love the work you all did, quality & speed......feel free to publish them!

Lanny O - Fairview, Oregon

Elmer, Received the 2nd 4WD license plate at 12:59, on 4-15-10. I am really impressed with all the plates that I have ordered, plusthe fast courteous e-mails, precise tracking and the fast shipping. Thanks again

Jason - Columbus, Ohio

I got your plates today. Wow, they are fantastic! They look very professionally done and the color matches perfectly. I couldn't ask for any better. It was done exactly as I had drawn it up. Hats off to you.If you twisted my arm and forced me to say anything less than "perfection" I'd say I wouldn't mind if the metal were twice () as thick. It does seem a bit thinner than what I had expected.These custom plates rock! Thanks a bunch. :)Jason

Licenseplates.TV - BioToggle

Youtube - cZkFy2E9Nrg

The Platemaker AppToggle

Platemaker

Installation Guide

ContactsToggle

Ask The PlateMeister™Toggle

Free ShippingToggle


Copyright © 2002-2025 Autogeardepot.com, Inc. All rights Reserved.
Please refer to legal for Terms of use. Send all other inquiries to address below: platemeister@licenseplates.tv